Recording - JVC RV-B99 BK/BU Instructions Manual

Powered woofer cd system
Hide thumbs Also See for RV-B99 BK/BU:
Table of Contents

Advertisement

RECORDING

÷ During recording, the ALC (Automatic Level Control) circuit automatically
optimizes the recording level, so manual recording level adjustment is
unnecessary.
÷ Check that the safety tab on the cassette tape is not broken off.
Synchronized recording with the CD player
÷ In this system, the CD player starts play when the cassette deck enters
the recording mode.
Operate in the order shown
1
Load a CD and close the CD door.
Press the CD 3/8 button to engage the CD mode, then press the 7
2
STOP button to enter the stop mode.
3
Load a cassette with side A facing out. (Wind past the tape leader
before starting recording.)
÷ Make sure the tape direction is set to 3 (forward direction).
4
Select the required reverse mode (
÷ When programmed play is required, program the required tracks
using the remote control. (See page 15.)
÷ Select tracks with a total playing time which does not exceed the
tape length (refer to the liner notes).
5
Press the ONE TOUCH REC button; synchronized recording will start.
÷ Recording starts in the forward direction and CD play starts
automatically.
÷ The forward direction indicator (3) blinks and the REC indicator
lights up in the display window.
÷ Non-recorded sections of approx. 4 seconds are automatically left
between tunes.
÷ When the CD player stops, the tape deck stops automatically.
÷ To stop recording in the middle, press the 7 STOP button. The cassette
deck also stops after 4 seconds.
Note:
÷ During CD synchro recording, the CD 3/8 and (4, ¢) buttons do
not function.
÷ If a recording is completed in the reverse direction (2), it is possible to
continue recording without changing the direction to forward (3), until
the tape ends.
÷ If continuous play
is selected, a recording in the reverse direction
(2) automatically stops at the end of the tape. The
in the display window during recording.
÷ CD complete recording function (Synchro recording mode only)
If the tape is reversed while a CD is being played, recording will be
done on the reverse side of the tape as follows:
* When less than 10 seconds of the last tune on the forward side of the
tape have been recorded, recording on the other side of the tape will
start from the beginning of the previous track.
* When more than 10 seconds of the last tune on the forward side of
the tape have been recorded, recording on the other side of the tape
will start from the beginning of the current track.
20
5
1
2 3
or
).
indicator appears
Note:
This unit has recording characteristics suitable for normal and CrO
tapes. Normal and CrO
tapes have different characteristics from
2
metal tapes.
4
Before recording
When the tape direction is set to 2 (reverse direction) after a cassette
tape is inserted...
Press the TAPE 23 button twice to change the tape direction to 3
1
(forward direction).
Press the 7 STOP button.
2
3
Change the mode to CD by pressing the CD
(If a non-recorded tape with side A facing out is recorded in the reverse
2
direction (
), the recording is stopped immediately.)
When non-recorded section between tunes is not required...
Press the CD 3/8 button twice. The CD player enters the pause
1
mode.
2
Press the ONE TOUCH REC button to start recording.
Note:
÷ Depending on the CD used, non-recorded sections of different lengths
may be left between tunes.
To record one track...
Play the track to be recorded. Then press the ONE TOUCH REC button
to locate the beginning of the track and enter the one track recording
mode. After the recording is finished, the CD player and cassette deck
both stop.
To record only on side B or in the middle of a tape...
1
Load the cassette with the required side facing out.
2
Set the reverse mode to
with the remote control unit.
3
Press the ONE TOUCH REC button on the main unit.
Synchronized recording starts and the cassette deck stops automatically
when CD playback is completed.
How to rewind a tape
Press the TAPE 23 button (to set TAPE mode).
1
Press the 7 STOP button.
2
Press the 4 (REW) button.
3
SLEEP
DOWN
UP
SET
PROGRAM
RANDOM
AUTO
PRESET
REPEAT
TUNER
AUX
C D
TAPE
BAND
FM MODE
FF
REVERSE MODE
REW
MULTI CONTROL
DISPLAY
ACS
SOUND
3/8
button.
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rv-b99 bkRv-b99 bu

Table of Contents