Cassette Playback; Using With Another Audio Unit - JVC RV-B99 BK/BU Instructions Manual

CASSETTE PLAYBACK

Operate in the order shown
÷ When AC power is used.
(When battery power is used, switch on the
operation.)
1
Load a cassette tape with side A facing out.
2
Press to start playback. (The power is switched on and the TAPE
mode is engaged to start tape playback.)
3
Adjust the volume.
÷ After loading a cassette tape, simply press the TAPE 23 button. The
power is switched on and the tape starts playback. (To select the
playback direction, press the TAPE 23 button. The change in direction
can be checked in the tape direction indicator (2 or 3).)
÷ When the tape plays back with the reverse mode set to
play) or (both side play) mode, the tape stops automatically at the
end of the tape after playing one or both sides. When the reverse mode
is set to the (continuous play) mode, the tape continuously plays
one side after the other until you stop operation.

USING WITH ANOTHER AUDIO UNIT

Operate in the order shown
÷ When AC power is used. (When battery power is used, switch on the
button first, then perform operation.)
1
Connect the audio unit, turntable, MD player, etc. to the AUX IN jack
(see page 5).
2
Press the AUX button. (The power is switched on and the AUX mode
is engaged.)
3
Start playback on the connected audio unit.
(For more details, refer to the instruction manual of the connected
audio unit.)
4
Adjust the volume.
(The volume level is displayed in the display window.)
button first, then perform
1 2 3
(single side
2 4
1
LOCK
RELEASE
Set to RELEASE to open.
Notes:
÷ Do not turn the LOCK/RELEASE knob until the tape mechanism has
stopped moving.
÷ When no tape is loaded in the deck, its tape playback direction can not
be switched over.
How to fast-wind tapes
1. Press the TAPE 23 button (to set to TAPE mode).
2. Press the 4 (REW) or ¢ (FF) button.
2
RELEASE
Press the cassette holder in and set to
LOCK to close, listening for the click that
indicates the cassette holder is securely
closed.
AUX
LOCK
17