Table of Contents
Advertisement
Recording Tracks from a CD
Before recording sound to a cassette tape, refer to "About Cassette Tapes" (
Turn on the main unit, and then follow the procedure below. (
1
Insert a cassette tape for recording.
Both ends of a cassette tape are unrecordable parts (leader tapes). Before start record-
ing, wind the tape past the leader part of the cassette tape.
2
Press
3
Press
4
Press
Sound-synchronized recording automatically starts CD playback and recording to the
cassette tape at the same time.
7
Quitting Recording
Press
.
NOTE
• When the cassette tape stops, CD playback will be paused.
• You can record tracks in the desired order by using the CD program playback function
(
page 31).
• Do not press the other source buttons during recording. Another source will be se-
lected and recorded.
• This product is compatible with normal cassette tapes (TYPE I). The product is not
compatible with high position cassette tapes (TYPE II) or metal cassette tapes (TYPE IV).
• The sound input level during recording is automatically adjusted.
• Do not pause the tape for more than a few minutes. Press
2 1
.
.
.
page 11)
4
3
PUSH
to stop the tape instead.
page 40).
34
Advertisement
Table of Contents
