PictBridge : RESET
■ Initializes user-changed configurations.
1. Connect the camera to your printer. The [USB] menu
must be set to [PRINTER] before you connect the
camera to the printer.(See p.63)
2. Use the LEFT and RIGHT buttons to select the [RESET]
menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
- If [NO] is selected
- If [YES] is selected
※ Default print setting varies depending on the printer manufacturer.
For your printer's default setting, refer to the user's guide that came with your printer.
Downloaded from
www.Manualslib.com
: Settings will not be reset.
: All print and image settings will be reset.
manuals search engine
◀
RESET
NO
YES
▲
MOVE:
SET:OK
▼
《67》
▶