Samsung Digimax A402 User Manual page 16

Instructions on how to use the memory card
INFORMATION
● If you open the battery chamber cover when the camera power is turned on, the power
will turn off automatically.
● Don't remove the memory card when the camera status lamp(Green) is blinking as this
may cause damage to data in the memory card.
■ The camera can use SD Memory Cards and MMC (Multi Media Card).
Card
pins
Write protect
switch
Label
■ When using a 16MB internal memory, the specified shooting capacity will be as follows.
These figures are approximate as image capacities can be affected by variables such as
subject matter.
Mode
Quality / Size 2272(P)
SUPER FINE
FINE
NORMAL
15FPS
24FPS
《16》
Downloaded from www.Manualslib.com
[ SD(Secure Digital) memory card ]
STILL IMAGE mode
2048
10 13
20 27
33 42
- -
- -
manuals search engine
The SD memory card has a write protect switch
that prevents image files from being deleted or
formatted.
By sliding the switch to the bottom of the SD
memory card, the data will be protected.
By sliding the switch to the top of the SD
memory card, the data protection will be
cancelled. Slide the switch to the top of the SD
memory card before taking a picture.
1600(M) 1024 640(E)
17 38
37 78
50 113
- -
- -
MOVIE CLIP mode
640 320
81 -
145 -
234 -
- 26SEC 1MIN11SEC
- 18SEC 40SEC
-
-
-