Pictbridge : Reset; Important Notes - Samsung EC-TL110ZBPBUS User Manual

PictBridge : Reset

Initializes user-changed configurations.
1. Use the Up / Down button to select
the [Reset] menu tab. And then press
the Right button.
2. Use the Up / Down button to select
the desired sub menu, and then press
the OK button.
If [Yes] is selected : All print and image settings will be reset.
If [No] is selected : Settings will not be reset.
Ä Default print setting varies depending on the printer manufacturer.
For your printer's default setting, refer to the user's guide that
came with your printer.

Important notes

Be sure to observe the following precautions!
å This unit contains precision electronic components. Do not use or
Date :Auto
store this unit in the following locations.
File Name :Auto
- Areas exposed to severe changes in temperature and humidity.
Reset No
No
- Areas exposed to dust and dirt.
Yes
- Areas exposed to direct sunlight or the inside of a vehicle in hot
Back Set
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
å Do not leave this camera in places subject to dust, chemicals (like
naphthalene and mothballs), high temperature and high humidity.
Keep this camera with silica gel in a hermetically sealed box when
not planning to use the camera for a long period of time
å Sand can be particularly troublesome to cameras.
- Do not let sand get inside the camera when using it on beaches,
- Doing so may result in failure or may permanently render the
å Handling the camera
- Never drop the camera or subject it to severe shocks or vibrations.
- Protect the large size LCD monitor from an impact. When this
- Avoid obstructing the lens or the flash when you capture an image.
- This camera is not waterproof.
weather.
coastal dunes, or other areas where there is lots of sand.
camera unusable.
camera is not used, keep it in the camera case.
To avoid dangerous electrical shocks, never hold or operate the
camera with wet hands.
91