Making Connections - Korg ToneWorks Pandora PX4A Owner's Manual

Making connections

When connecting an external device (ie-guitar
amp, CD player, ac adapter, etc) be sure to turn
the unit off.
mini-component /
stereo etc.
guitar amp /
powered monitor
*4
headphone
*5
guitar
12
AC adapter
*1
*3
*3
CD player etc.*2
*1 Be sure to use only the specified AC adapt-
er (DC4.5V
*2 If a CD player or other audio source is con-
nected to the AUX jack, you can play along
to it with your guitar. However the volume
must be adjusted from the connected device.
*3 Connecting cables are sold separately.
*4 The PX4A's output jack is stereo. If you use
a standard mono cable to connect it to a gui-
tar amp etc., only the L (left) output will be
heard.
*5 The PX4A's output level and sound quality
will vary depending on which headphones
are used. We recommend using good quali-
ty low impedance headphones, 32 Ohms or
less with a sensitivity rating near 100dB/mW
or above. Many headphones sold for use with
portable CD or cassette players will work just
fine.
).