Adjusting The Harness; Adjusting The Buckle; Extra Length Buckle - Britax Car Seat User Manual

Securing Your Child

Adjusting the Harness

1 Loosen the harness by lifting the harness
release lever while pulling the shoulder straps
forward as far as possible (Fig. A).
2 From the rear of the child seat, unhook the
shoulder harness straps from the yoke (Fig. B).
3 Pull the harness straps through the shell, foam and
cover to the front of the child seat.
4 Thread the harness straps through the
appropriate harness slots in the cover, foam and
seat shell. (Fig. C).
WARNING! HUGS chest pads must
™
be used at all times.
5 Reattach the harness straps to the harness yoke.
6 Pull harness adjuster strap to tighten the
harness.
7 Verify that all straps are threaded at the same
height and are not twisted.
34

Adjusting the Buckle

The buckle has two positions and should be
adjusted to fit your child.
IMPORTANT: Select the slot closest to, but not
under, the child (Fig. D).
A See page 38 for buckle removal and rethreading
instructions.

Extra Length Buckle

There are two buckles available for use with this child seat. If your child
requires more length in the buckle strap to comfortably ride in the child
seat, uninstall the buckle and rethread the alternate buckle included
with the child seat in the appropriate position.
b
reaches 65 lbs (29.5 kg).
c
WARNING! Do not use the longer buckle until the child
Securing Your Child
d
35