Seat Extension; Pad Inserts; Head Pad; Pommel - Britax Car Seat User Manual

Using Child Seat Features

Seat Extension

The seat extension is intended to provide extra
leg support for taller children. Use the seat
extension when a child's legs have grown too
long to allow a comfortable seating position in
the child seat alone.
Attaching the Seat Extension
Pull the cover back from the bottom of the child
seat. Insert the seat extension into the holes in
front of the child seat prior to installation in the
vehicle (Fig. A). Replace the cover.
Pad Inserts (Optional)
The pad inserts (Fig. B) are designed to be
adjusted to offer the child more or less support
as needed.
The two flat pads are intended for use under the
cover on the sides of the child seat. The four
foam cylinders are intended for use under the
cover and are secured by elastic loops.
30
Head Pad (Optional)
Seat
The head pad should be used to provide
Extention
additional padding and support for the child's
head.
Attaching the Head Pad
Route the straps through the top slots, then
over the top of the child seat (Fig. C). Fasten the
A
head pad straps using the snap buttons.
Adjusting the Head Pad
To adjust the height of the head pad, slide it up
Flat Pads
or down as needed (Fig. D).
Pommel (Optional)
The pommel (Fig. E) is intended for extra
comfort with older children. While the pommel is
Cylinder Pads
optional, the belly pad should always be used.
Removing the Pommel
b
To remove, slide the belly pad and pommel off
of the buckle. Replace the belly pad.
Installing the Pommel
To install, slide the belly pad off the buckle to
remove. Slide the pommel, and then the belly
pad onto the buckle.
Using Child Seat Features
c
d

Pommel

e
31