Assignment Of Digital Audio Inputs And Outputs - Loewe Spheros R 37 Operating Instructions Manual

Operating additional equipment
Assignment of digital audio inputs and
outputs
Audio input "AUDIO DIGITAL IN"
The TV set has a coaxial digital audio input "AUDIO DIGITAL IN" and a coaxial
digital audio output "AUDIO DIGITAL OUT". If you are using an external digital
surround amplifier for sound reproduction, you have to feed digital audio
signals to the TV, e.g. from the DVD player.
AV2
DVD
MULTICHANNEL AUDIO OUT
LEFT CENTER LEFT
REAR FRONT
DIGITAL AUDIO OUT
STEREO OUT VIDEO OUT
PCM/MPEG2/AC3/DTS
MAINS
RIGHT SUBW. RIGHT R L (CVBS) (Y/C)
OPT OUT DIG OUT S-VIDEO OUT
REAR FRONT AUDIO VIDEO OUT
Connect the output socket of the DVD player (DIG OUT) to the TV's "AUDIO
DIGITAL IN" socket with a cinch cable.
In the connection wizard, specify that audio transmission is to be digital. Specify
that the digital sound is to be assigned for example to the Euro-AV socket  to
feed the digital sound to the digital audio output of the TV set and via this to
the external audio amplifier. Further information about this can be found on
page 36.
- 34
AUDIO DIGITAL
IN OUT
Surround Amplifier
I
PREOUT
AUX- I /O AUX1 IN AUX OUT AUX 2
FL C FR L L
DIGITAL
IN
II
DIGITAL
TO TV- I /O
OUT
SL SUB SR
R R
Audio output "AUDIO DIGITAL OUT"
The digital audio signal is applied at the "AUDIO DIGITAL OUT" socket of the TV.
For example, you can connect an external digital audio amplifier or the Loewe
Auro system here.
An analogue audio signal from the TV set or another sound source which is
received at one of the Euro-AV sockets of the TV set is converted into a digital
signal (PCM) and output at the "AUDIO DIGITAL OUT" socket. Conversion from
external analogue AV sources to PCM is not possible if the TV's loudspeakers are
used as a centre channel. In this case, connect your audio amplifier additionally
to the TV (AUDIO OUT L/R) with a cinch cable and switch the audio amplifier to
analogue audio input.
The digital TV sound or the digital sound of a connected auxiliary device is only
audible via an external digital audio amplifier (e.g. Loewe Auro system).