User Password - SOYO SY-P4I875P DRAGON 2 V1.0 User Manual

BIOS Setup Utility
3. Enter your new password and press [Enter]. The following message
appears, prompting to confirm the new password:
4. Re-enter your password and then press [Enter] to exit to the Main Menu.
This diagram outlines the password selection procedure:
Type the Password
Type the Password
and Press: <Enter> ↔
Press:
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
Enter Password: ∗∗∗∗∗
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
Confirm Password: ∗∗∗∗∗
LOAD SETUP DEFAULTS
LOAD BIOS DEFAULTS
Esc : Quit
F10 : Save & Exit Setup

3-12 USER PASSWORD

When the user password option is on, you are not allowed to change any
setting in the [CMOS SETUP UTILITY] except for changing the user's
password. Only the supervisor's password will allow you to make changes in
CMOS setup.
The password setting procedure is similar to that for the [SUPERVISOR
PASSWORD] (Refer to section 3-11).
Confirm Password:
ROM PCI/ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
INTEGRATED PERIPHERALS
Enter Password:
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
After you confirm the password,
After you confirm the
↑ ↓ → ←
press <Esc> to exit
(Shift) F2
password, press
Time, Date, Hard Disk Type...
87
SY-P4I875P DRAGON 2 V1.0
Press <Enter> without
↔
Press:
entering the password
Without entering password
Password Disabled!!
: Select Item
°
: Change Color
to exit