SOYO SY-P4I875P DRAGON 2 V1.0 User Manual page 50

Hardware Installation
Select [STANDARD CMOS SETUP]
Step 1.
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to
"Auto".
Select [LOAD OPTIMIZED DEFAULTS]
Step 2.
Select the "LOAD OPTIMIZED DEFAULTS" menu and type "Y" at the
prompt to load the BIOS optimal setup.
Select [SOYO COMBO FEATURE]
Step 3.
Set the [CPU Frequency Select] field to "Manual", to be able to change the
CPU frequency 1 MHz stepping.
Select [SAVE & EXIT SETUP]
Step 4.
Press <Enter> to save the new configuration to the CMOS memory, and
continue the boot sequence.
You are now ready to configure your system with the BIOS setup program.
Go to Chapter 3: BIOS SETUP
SY-P4I875P DRAGON 2 V1.0
45