The Battery Indicator Lamp Blinks While Charging; It Takes A Long Time To Charge The Battery; The Wireless Lan Function Cannot Be Used While Charging; Power Bank - QNAP QGenie QG-103N User Manual

Qnap qgenie power bank user manual
Hide thumbs Also See for QGenie QG-103N:
Table of Contents

Advertisement

When the battery is completely discharged, recharging starts immediately; however, it
may take a while until the battery indicator lamp lights.

The battery indicator lamp blinks while charging.

If an abnormality (e.g. increased unit temperature, or insufficient power input) occurs
while charging, the battery indicator lamp may blink orange, and charging may stop.
Please try with another USB AC adaptor, or change another port when charge with PC.

It takes a long time to charge the battery.

The charge time detailed in this Help Guide is approximate. Charge time may be long
depending on usage conditions.
Charge by PC may take longer time than using USB AC adapter.

The wireless LAN function cannot be used while charging.

While charging from a computer, the wireless LAN function turns off automatically.

Power bank

This unit does not supply power to other devices.

Make sure that the USB cable is connected correctly.
Use this unit within this operating temperature range.
The remaining battery charge of this unit may be low. Recharge QGenie and try again.
The device to be supplied power is not ready for charging. For details on how to charge
the device, refer to its instruction manual.
The maximum output current of the USB port of this unit is 1.5A. If the supply output
current exceeds 1.5A, the power is stopped for safety.
Before supplying power to another device, be sure to check the voltage and current
ratings of the device.
If battery life is considerably short, even when the battery is fully charged, the battery
may have reached the end of its lifespan. (The lifespan of the battery varies depending
on usage conditions.)
97 |

Advertisement

Table of Contents
loading

Table of Contents