The Wireless Lan Connection Has Stopped After Connect To Pc; Myqnapcloud; I Can't Register My Qgenie To Myqnapcloud; Qfile - QNAP QGenie QG-103N User Manual

The wireless LAN connection has stopped after connect to PC


If this unit is connected to a computer with the USB cable, the wireless connection will
be stopped and USB connection will be established.

When changing from wireless LAN connection to USB connection, make sure that data
copy via wireless LAN is not in progress. If you change to USB connection while data
copy is in progress via wireless LAN, data may be damaged.

myQNAPcloud

I can't register my QGenie to myQNAPcloud

Please confirm if:
1. QGenie is connected to Internet.
2. The myQNAPcloud ID and password are correct.
3. The device name is already used by others.
4. The router supports UPNP service.

"Qfile"

"Qfile" cannot be installed.


There is not enough free space on your device.
Check the amount of free space on your device.

What file formats are supported by "Qfile"?


Please refer to [Specifications] -> [Software] -> [

Files cannot be edited by "Qfile."


"Qfile" does not support file editing. However, you can change folder names and file
names.

How can I check the version of "Qfile"?


Press (i) in the top left corner in Qfile's server list menu.

I can not login QGenie by Qfile

Please confirm:
1. admin password is correct. You can reset QGenie's setting when password is forgotten.
] in this manual.
Multimedia Formats
105 |