Data Copy - QNAP QGenie QG-103N User Manual


In iOS 5 go to [Settings] – [Location Services] instead.

Data copy

It takes too long to copy data.

Ambient conditions (obstacles between this unit and your device, electromagnetic
interference, wall materials, etc.) may adversely affect the wireless communication
range. Change the location of this unit, or move your device and this unit closer
together.

Equipment that uses the 2.4 GHz frequency band, such as a microwave oven or
Bluetooth device, may be in use near this unit. Move such equipment away from this
unit, or turn the equipment off.

Another wireless LAN device may be interfering with this unit.
Data cannot be copied to an Android device.

The memory area of the Android device is write-protected.

Release the write-protection, and then copy.

In Android 4.4, copy files to external SD card are prohibited.

There is not enough free space on the memory area of the Android device. Delete
unnecessary data in the memory area of the Android device, and then copy.
Data cannot be copied to an iOS device.

There is not enough free space on the iOS device.

Delete unnecessary data and try again.

Check the following settings.
iOS 5: Settings - Location services, and check whether "Qfile" is permitted.
iOS 6: Settings - Privacy - Photos, and check whether access from "Qfile" is permitted.
Data cannot be copied to a USB device (USB flash drive, etc.).

The USB device (USB flash drive, etc.) is write-protected.

Release the write-protection, and then copy.

There is not enough free space on the USB device (USB flash drive, etc.). Delete
unnecessary data in the USB device (USB flash drive, etc.), and then copy.
102 |