Using Sleep Timer; Timer Priority - JVC MX-GB5C Instructions Manual

4
Set the on-time you want
the unit to turn on.
1) Press ¢ or 4 to set the
hour, then press SET/DISPLAY.
2) Press ¢ or 4 to set the
minute, then press SET/DISPLAY.
"OFF TIME" appears for 2
seconds, then the unit enters off-
time setting mode.
5
Set the off-time you want
the unit to turn off (on
standby).
1) Press ¢ or 4 to set the
hour, then press SET/DISPLAY.
2) Press ¢ or 4 to set the minute,
then press SET/DISPLAY.
The unit enters preset station
selecting mode.
6
Select the preset station.
1) Press ¢ or 4 to select the
band ("TUNER FM" or
"TUNER AM"), then press
SET/DISPLAY.
2) Press ¢ or 4 to select a preset
channel number, then press SET/
DISPLAY.
The REC (recording timer) indicator
stops flashing and remains lit. The settings you have done
are shown on the display in sequence for your
confirmation.
7
Press STANDBY/ON to turn
off the unit (on standby) if
necessary.
About the recording source
If you change the source while recording, the recording source also
changes.
To turn on or off Recording Timer after its setting is
done
1 Press CLOCK/TIMER repeatedly
until "REC" appears on the display.
2 To turn off the Recording Timer,
press CANCEL/DEMO.
The REC (recording timer) indicator
goes off from the display ("OFF" appears for a while).
The Recording Timer is canceled, but the setting for the
Recording Timer remains in memory until you change it.
To turn on the Recording Timer, press
SET/DISPLAY.
The REC (recording timer) indicator
lights up on the display. The settings you have done are
shown on the display in sequence for your confirmation.
25

Using Sleep Timer

With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time
length passes.
On the remote control ONLY:
1
Press SLEEP.
The time length until the shut-off time appears
and the SLEEP indicator starts flashing on the
display.
• Each time you press the button, the time length changes
as follows:
SLEEP10 SLEEP20
SLEEP120
OFF
(Canceled)
2
Wait for about 3 seconds after specifying the
time length.
The SLEEP indicator stops flashing and remains lit.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 3 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly until "OFF"
appears on the display so that the SLEEP indicator goes off
from the display.
• Sleep Timer is also canceled when you turn off the unit.

Timer Priority

Since each timer can be set separately, you may wonder what
happens if the setting for these timers overlaps.
Here are some examples.
• Recording Timer has priority over Daily Timer.
If Recording Timer is set to come on while Daily Timer is
operating, Daily Timer is canceled and Recording Timer
start working.
AM 6:00
Recording Timer
Daily Timer
• If Sleep Timer overlaps with another timer (either Daily
Timer or Recording Timer), a timer with the earlier shut-off
time has priority.
AM 6:00
Sleep Timer
Recording Timer
When using the Recording Timer and Sleep Timer at the
same time, pay special attention to the shut-off time.
SLEEP30 SLEEP60
SLEEP90
6:30 7:00 7:30
canceled.
7:30
6:30 7:00
canceled.