Playing Back Tapes; Playing Back A Tape - JVC MX-GB5C Instructions Manual

Playing Back Tapes

Playing Back a Tape

1
Press 0 for the deck you want to use.
For Deck A
2
Put a cassette in, with the exposed part of the
tape down and the side you want to play
facing front.
• You can play back only type I tapes.
3
Close the cassette holder gently.
4
Press TAPE A 3 3 3 3 3 for the
deck A or TAPE B 3 3 3 3 3 for
the deck B .
The tape play starts and the
tape running indicator (3) starts flashing slowly.
The operating deck (A or B) indicator shows the
deck currently selected.
When the tape plays to the end, the deck automatically stops.
To stop during play, press 7.
To fast-forward the tape, press ¡ (or ¢/¡ on the
remote control). The tape running indicator (3) starts
flashing quickly.
To rewind the tape, press 1 (or 4/1 on the remote
control). The tape running indicator (2) starts flashing
quickly.
When you fast-forward or rewind the tape while the
tape play is stopped
You can fast-forward or rewind the tape in the deck currently
selected.
To remove the cassette, press 0 for deck A or B.
For Deck B
For Deck A
The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.
For Deck B
20