Makita 2702x1 Instruction Manual page 5

17.
Avoid abrupt, fast feeding. Feed as slowly as possible when cutting hard
workpieces.
Do
not bend
or twist
workpiece
while feeding. If you stall or
jam the blade in the workpiece, turn the tool off immediately. Unplug the
tool. Then clear the jam.
18.
Never remove cut-off pieces near the blade or touch the blade guard while
the blade is running.
19. Don't abuse cord. Never yank cord t o disconnect from receptacle. Keep cord
away from heat, oil, water and sharp edges.
SAVE THESE INSTRUCTIONS.
5