Operation Caution - Makita 2702x1 Instruction Manual

When operating the switch lever, it is con-
venient to view it through the window area
in the table.
I
CAUTION:
When not using the tool, remove the key and store it in a secure place. This prevents
Before plugging in the tool, always check to see that the switch lever actuates properly
Do
not pull the switch lever hard without the key. This can cause breakage of the switch.
unauthorized operation.
and returns to the "OFF" position.
OPERATION
CAUTION:
*Always use "work helpers" such as push sticks and push blocks when there is a danger
that your hands or fingers will come close to the blade.
Always hold the workpiece firmly. Do not bend or twist it while feeding. If the workpiece
is bent or twisted, dangerous kickbacks may occur.
Never withdraw the workpiece while the blade is running. If you must withdraw the
workpiece before completing a cut, first switch the tool off while holding the workpiece
firmly. Wait until the blade has come to a complete stop before withdrawing the work-
piece. Failure to do so may cause dangerous kickbacks.
Never remove cut-off material while the blade is running.
Never place your hands or fingers in the path of the saw blade. Be especially careful with
Always secure the rip fence firmly, or dangerous kickbacks may occur.
Always use "work helpers" such as push sticks and push blocks when cutting small or
bevel cuts.
narrow workpieces, or when the dado head is hidden from view while cutting.
Work helpers
Push sticks, push blocks or auxiliary fence are types
of
"work helpers". Use them to make
safe, sure cuts without the need for the operator to contact the blade with any part of the
body.
12