Motorola PTP 600 Series Deployment Manual page 9

Mast or Tower Installation Instructions
The ODU is pre-fitted with a mounting bracket (designed to ease installation) and with earth
bonding leads.
WARNING: When mounting the ODU, observe the following precautions against failure of
the assembly:
• Do not remove the pre-fitted mounting bracket from the ODU.
• Do not mount the ODU on poles with diameter less than 50mm (2") or greater than
75mm (3"). The ODU mounting bracket is designed to work only with poles with
diameter in the 50 mm (2") to 75 mm (3") range.
• Do not over-tighten the bolts.
More information:
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Mast, Tower or Building Installation
PTP 600 Series User Guide Section: "Mounting the ODUs"
9