Motorola PTP 600 Series Deployment Manual page 6

Hide thumbs Also See for PTP 600 Series:

Table of Contents

CAUTION:

unreliable.

More information:

Configuration Checks

Step 1: Use a web browser to connect to IP address http://169.254.1.1 for Slave and

http://169.254.1.2 for Master units. Select System Administration and Login (the

password is empty for new units). We recommend that you change the password by

selecting "Change Password.

Step 2: If an upgrade to the software is required, select Software Upgrade and follow the

on-screen instruction. Latest software is available from our web site:

(http://motorola.motowi4solutions.com/software/#ptp)

Step 3: Check the License Key information and ensure you are using the correct the

Region Code. Otherwise, select License Key and replace with the alternate key supplied

and reboot the unit.

4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Bench Testing (Optional)

Do not dress the RJ45 cables too tightly, as this may make the connections

PTP 600 Series User Guide

Section:

"Connecting Up"

Table of Contents