Daewoo DW-5010 Service Manual page 11

PROBLEM
Are clothes or the Safely
Cover stuck out of the
THERE ARE
STRANGE
NOISE AND
SEVERE
Coupling Assembly and
VIBRATION
DURING
SPINNING.
Is The Spin Dryer itself
Is the Bellows Assembly
THERE IS
LEAKAGE
DURING SPIN
D RYING.
Concerning Drainage
PROBLEM
Are there impurities in
DRAINAGE IS
Are there impurities in the
NOT
case valve or Inlet Joint.
SATISFACTORY.
Is the Drain Selector is
at the DRAIN position?
WATER KEEPS
DRAINING
DURING WASH
10 TROUBLE SHOOTING
CHECK POINT
NO
Is the wash load well
balanced?
YES
YES
Spin Basket?
NO
YES
Is the assembly
between the Drum
Spin Motor or Spin
Dryer loose?
NO
NO
well Balanced?
YES
NO
properly assembled?
YES
CHECK POINT
YES
the Drain Strainer?
NO
YES
NO
YES
NO
CAUSE
Spin Dryer does not bal-
anced due to wash load.
Tub is in contact with the
object stuck out.
Improper structural
assembly
Spin Dryer unbalance
The Waterseal or the
Oilless metal in the Bellows
Assembly worn out.
Waterproofing not working
due to defective assembly.
The waterseal or the oilless
metal in the Bellows
Assembly is worn out.
CAUSE
Impurities are obstructing
drainage.
Impurities are obstructing
drainage.
Impurities are blocking the
Drain Hose.
Misoperation
There are impurities
between the Case Valve
and Valve Bellows.
SOLUTION
Reload the clothes so
they are well balanced.
Reload the clothes and
press down the Safety
Cover into Spin Basket.
Tighten the Bolt in Drum
Coupling Assembly
Re-assemble Spin Dryer.
Replace Bellows Assembly
Re-assemble Bellows
Assembly.
Replace Bellows Assembly.
SOLUTION
Disassemble Pulsator
and take out impurities in
Drain strainer
Remove impurities or
replace Case Valve or
inlet joint.
Remove impurities
Turn Drain Selector to
WASH/RINSE positon
Remove impurities.
Or replace Case Valve.