Ac Power - Pdu Options - HP XP P9500 Owner's Manual

Table 29 System components heat and power specifications (continued)
Component Product Number
AV492A
AV493A
AV494A
1
Heat (KW, BTU, Kcal) and Power (kVA) values are for determining rated load for site planning. Actual heat generation
and power demand may be less.
2
Power is consumed during the battery back-up time only.
3
Actual values at a typical I/O condition. (Random Read and Write, 50 IOPSs for HDD, 2500 IOPSs for SSD, Data
Length: 8Kbytes). These values may increase for future compatible drives.
4
Maximum values with all fans rotate at maximum.
5
AV41 1B Base 2.5in Drive Chassis does not include power supplies consequenly demands zero (0) kVA and geneates
no (0) kW heat.

AC power - PDU options

P9500 is configured for input power using separate rackmount PDU products. PDUs are available
for three phase or single phase power for NEMA and IEC compliance applications.
Table 30 P9500 AC PDU options
Product
Number
AV404A
AV404AU
AV405A
AV405AU
AV406A
AV406AU
AV407A
AV407AU
Notes:
1. Each PDU has one fixed power cord with attached plug. Power cord is not removable.
82 Specifications
Downloaded from www.Manualslib.com
HP XP P9500 Disk Array Component
200GB SAS 2.5in DP MLC SSD
400GB SAS 2.5in DP MLC SSD
800GB SAS 2.5in DP MLC SSD
Number of
Local Power PDU per Rack
3 phase (4 2
wire)
3 phase (5 2
wire)
single phase 4
NEMA
single phase 4
IEC
manuals search engine
Branch circuit
requirements
1
per PDU Plug Type
208-240V, 3Ø, NEMA
4-wire, 30A L15-30P
380-415V, 3Ø, IEC60309 4
5-wire, 16A pole, 5-wire
Category D 380-415VAC,
Breaker 16A
200-240V, 1Ø, NEMA L6-30P
3-wire, 30A
200-240V, 1Ø, IEC60309 2
3-wire, 32A pole, 3-wire,
Category D 240VAC, 32A
Breaker
Power Consumption
1 1
Heat Output (kW) (kVA)
3 3
0.0026 0.0028
3 3
0.0026 0.0028
3 3
0.0067 0.0071
Facility
receptacle
needed Notes
NEMA For customers
L15-30R with, 208 - 240
VAC, 3-Phase,
4-Wire Power
Distribution
System
IEC60309 4 For customers
pole, 5-wire, with 380 - 415
380-415 VAC, VAC,
16A Three-Phase,
5-Wire Wye
Power
Distribution
System
NEMA L6-30R For customers
with single
phase power
and need
NEMA L6-30P
plug
IEC60309 2 For customers
pole, 3-wire, with single
240VAC, 32A phase power
and need
IEC60309 32A
plug