Adjusting The Height Of The Presser Bar; Adjusting The Amount Of Tiw Thread Takeup - JUKI DLN-415 Instruction Book

ADJUSTING THE HEIGHT OF THE PRESSER BAR

r
ADJUSTING THE AMOUNT OF THREAD TAKE-UP
When the height or the direction of the
presser bar is to be changed due to the
exchange of presrer foot:
1. Remove the rubber plug of the face plate
3. After the adjustment, securely tighten the
ret 5crew.
The amount of the thread take-up should
be changed according to the length oi stitcher
ideal thread tension.
1. When sewing heavy weight materials, move
the thread guide to your left.
The thread rake-up amount of the take-up
gets more.
2. When sewing light weight materials. move
the thread guide to your right.
The thread take-up amount gets less.