Adjusting The Pressure Of The Pre5W Foot; The Prepser Foot Hand Liffer; Height; Of The Feed Dog - JUKI DLN-415 Instruction Book

PRESSER FOOT AND FED9 DOG
5 kg (ll'lbr).
required, use the exchanging rpring in the
The presser foot hand lifter
To stop the prerser foot at the lifted po-
sition:
1. Rotate the hand liiter in the war
part either to right or left.
2. The presser
and rtopi.
3.
lifter once and the presw
down to the original position.
4 . With t h e k n e e liiter, t h e prerrer f o o t nilI
go up about Wmm(25/64")
Height of
the feed
The height a, the feed dog from the surface
of the throat plate is set from 0.7.0.8mm.
light weight materiali, if this height is
ing fork of the compound feed.
the feed dog base up and dawn and
3. After adjusting, tightly tighten the clamping
than 6 kg(13.2 Ibs)
of the face
foot will cmne
dog
In
m a y result.