Dell 1410X User Manual page 30

Movie, sRGB (provides more accurate color representation), and Custom (set
your preferred settings).
B
RIGHTNESS
C
ONTRAST
S
ATURATION
saturated color. Press
increase the amount of color in the image.
S
HARPNESS
sharpness.
T —Press
INT
the amount of red in the image (available for NTSC only).
A
DVANCED
ADVANCED" below.
PICTURE ADVANCED
Using the Picture Advanced menu, you can adjust the display settings of your
projector. The Picture Advanced menu provides the following options:
W
HITE
C
OLOR
cooler at higher color temperatures and warmer at lower color temperatures.
When you adjust the values in the Color Adjust menu, the Custom mode is
activated. The values are saved in the Custom mode.
30
Downloaded from www.Manualslib.com
NOTE:
If you adjust the settings for Brightness, Contrast, Saturation,
Sharpness, Tint, and Advanced, the projector automatically switches to
Custom.
—Use
and
—Use
and to adjust the display contrast.
—Allows you to adjust the video source from black and white to fully
to decrease the amount of color in the image and
to decrease the sharpness and
—Press
to increase the amount of green in the image and
—Press to activate Picture Advance Menu. See "PICTURE
NOTE:
Saturation, Sharpness, and Tint are only available when input source is
from Composite or S-Video.
I —Use and
NTENSITY
T —Allows you to adjust the color temperature. The screen appears
EMP
Using Your Projector
manuals search engine
to
adjust the brightness of the image.
to adjust the display white intensity.
to
increase the
to
to increase