Table of Contents
Advertisement
2.5
Expansion slot
2.5.1
Installing an expansion card to the
riser card bracket
The barebone server comes with a riser card bracket. You need to remove the
bracket if you want to install a PCI-X and/or a PCI Express x8 expansion cards.
To install a PCI-X card:
1.
Firmly hold the riser card bracket,
then pull it up to detach it from the
PCI Express x8 and PCI-X slots on
the motherboard.
2.
Place the riser card bracket on a
flat and stable surface, then remove
the screw from the PCI-X slot bay.
3.
Install a PCI-X card to the bracket
as shown, then secure the card
with a screw.
2-12
PCI-X slot
Chapter 2: Hardware setup
Advertisement
Table of Contents
