Table of Contents
Advertisement
The following items appear when you enable the Remote Access item.
Serial port number [COM1]
Allows you to select the serial port for console redirection. Make sure the selected
port is enabled. Configuration options: [COM1] [COM2]
Baudrate [19200]
Alllows you to select the serial port settings.
Configuration options: [115200] [57600] [338400] [19200] [9600]
Flow Control [None]
Allows you to select the Flow Control for console redirection.
Configuration options: [None] [Hardware] [Software]
Redirection after BIOS POST [Always]
Allows you to select the Redirection settings.
Configuration options: [Disabled] [Boot Loader] [Always]
Terminal Type [ANSI]
Allows you to select the target terminal type.
Configuration options: [ANSI] [VT100] [VT-UTF8]
VT-UTF8 Combo Key Support [Disabled]
Allows you to enable the VT-UTF8 combination key support for ANSI/VT100
terminals.
Configuration options: [Disabled] [Enabled]
5-34
Chapter 5: BIOS setup
Advertisement
Table of Contents
