Tomcat i875P S5102
Viewing Drive Assignments
The View Drive Assignments < 2> option in the Main Menu displays whether drives are
assigned to a disk arrays or are unassigned.
The menu also displays the data transfer mode that relates to speed used by each drive (U6
refers to 133MB/sec transfers, U5 refers to 100MB/sec transfers, U4 refers to 66MB/sec
transfers, etc...)
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Channel:ID Drive Model
1 : Mas
2 : Mas
Deleting An Array
The Delete Array <4> Menu option allows for deletion of disk array assignments. This is not
the same as deleting data from the drives themselves. If you delete an array by accident (and
before it has been used again), the array can normally be recovered by defining the array
identically as the deleted array.
WARNING: Deleting an existing disk array could result in its data loss.
Make sure to record all array information including the array type, the disk
members, and stripe block size in case you wish to undo a deletion.
FastBuild (tm) Utility 2.xx (c) 2002-2005 Promise Technology, Inc.
Array No
Array 1
Array 2
Array 3
Array 4
Chapter 4: SATA/RAID Setup (for SATA RAID model)
[ View Drive Assignments ]
QUANTUMCR8.4A
QUANTUMCR8.4A
[↑] Up [↓] Down [ESC] Exit Mode (D=DMA, U=UDMA)
[ Delete Array Menu ]
RAID Mode
Stripe
——
——
——
[↑] Up [↓] Down
http://www.tyan.com
Capacity(MB) Assignment Mode
8063
Array 1
8063
Array 1
[ Keys Available ]
Total Drv
Capacity(MB)
2
——
——
——
[ Keys Available ]
[ESC] Exit
[Del] Delete
4-12
U5
U5
Status
16126
Functional
——
——
——
——
——
——