Panasonic KX-UT113 Getting Started page 19

When selecting Ethernet cables (not included)
• Use flexible, high-quality, snagless (without strain relief) cables. Do
not use cables with coating that may tear or crack when bent.
To prevent damage to the cables, use cables that do not protrude from
the bottom of the base.
Connect the cables as shown in the following illustration.
Incorrect
Ethernet cable
• Use a straight CAT 5 (or higher) Ethernet cable (not included) that is
6.5 mm (
When connecting to a switching hub
• If PoE is available, an AC adaptor is not needed.
• This unit complies with the PoE Class 2 standard.
When connecting a PC
• Only a PC can be connected to the PC port. Other SIP phones,
or network devices such as routers or switching hubs, cannot be
connected.
• The PC port does not support PoE for connected devices.
• In cases where a PC is connected to the PC port, if the connection to
the SIP server is disconnected or reset, LAN communication to the PC
will also be disrupted.
• Generally, it is recommended that you connect no more than one PC
to the PC port of each unit.
When connecting cables and the AC adaptor
• Ensure that the Ethernet cables and the AC adaptor cord are clamped
to prevent damage to the connectors.
Ethernet cable
/ in) in diameter or less.
1
4
Connections
Correct
60 mm
3 / 8
(2 in) or less
19