Inspecting The Flywheel Components; Starter Gear Rim; Intermediate Gear - VESPA ET4 50 Workshop Manual

ET4 50

Inspecting the flywheel components

- Check that the flywheel internal magnets are in
good conditions.
- Check that the flywheel riveted joints are correctly
tightened.
- Check there are no deformations that may cause
rubbing on the stator and the Pick-Up.
- Check that the stator winding, its ferromagnetic
support and the pick-up are in good conditions.

Starter gear rim

- Check the toothing is level and in good conditions

Intermediate gear

- Check that the keying toothing on the crown and
the starter motor are in good conditions.
- Check that the bendix opens and returns ade-
quately.
Engine
ENG - 77