Mercury MerCruiser Owner's Manual page 75

3. Press the "WAYPOINT SEQUENCE" button to engage Waypoint Sequence mode. The
indicator light on the button will illuminate.
4. A horn beep sounds on VesselView and the green circle icon on the Axius Premier
screen will display "TRACK." The "TRACK" icon on the VesselView screen should
illuminate.
5. If you are in a waypoint arrival zone set by the chart plotter, Waypoint Sequence mode
only informs Axius Premier it is OK to proceed to next waypoint. Waypoint Sequence
mode acts as a waypoint acknowledge function and Axius Premier sounds a horn beep
when in the zone.
90-899883295 JUNE 2008
a - Indicator lamp
b - "WAYPOINT SEQUENCE" button
Waypoint Sequence TRACK icon
Section 3 - On the Water
a
b
35575
31411
Page 67