Table of Contents
Advertisement
Adjusting the Heritage™ Floor Lamp
The Heritage Floor Lamp
adjusts several ways:
1. To adjust lamp height – hold upper
shaft (F) with one hand, loosen height
adjusting collar. Raise or lower lamp
arm (D) to desired height. Tighten
collar (Fig. 5).
Note: Do not stand on cord or otherwise
restrict its movement while raising or
lowering the height of the lamp.
2. To rotate the lamp head right or
left, loosen height adjusting collar,
swing lamp arm to desired position.
Tighten collar. Lamp arm rotates a
full 360º (Fig. 6).
3. To adjust lamp head angle up
or down – loosen swivel knob
counterclockwise, place head at
desired angle, tighten swivel knob
to secure (Fig. 7).
4. To tilt lamp head toward you or
away from you – simply move
head to desired position (Fig. 8).
Fig.5
Fig. 6
Fig. 7
Fig. 8
7
D
Height
adjusting
collar
F
Swivel
Knob
Advertisement
Table of Contents
