Recording Onto An Md - JVC FS-MD9000 Instructions Manual

= =
ALL blank display
: Repeats one track.
ALL : In Normal Play mode, repeats all the tracks.
In Program Play mode, repeats all the tracks in the
program.
In Random Play mode, repeats all the tracks in ran-
dom order.

Recording onto an MD

REMOTE CONTROL RM-RXFSMD9000
DIMMER SLEEP POWER
CLOCK FM MODE TAPE/AUX
AHB. AUTO
¶ 8
SUPER PRO PRESET
/
PROGRAM RANDOM REPEAT
BASS TREBLE CANCEL
EDIT DISPLAY
/TITLE /CHARA
DISPLAY
UP
/ CHARA
< >
SET
DOWN
TUNER
MD CD
BAND
MD
7
VOLUME
Recording onto an MD from any of the sound sources is simple. Just
insert an MD to the Unit, have the source ready, make one or two
settings, and you are ready to record. For each source, the procedure
is a little bit different so we explain each separately. But first, here
are a few things to make your recordings better.
Things To Know Before You Start
Recording
It should be noted that it may be unlawful to re-record
pre-recorded tapes, records, or discs without the con-
sent of the owner of copyright in the sound or video re-
cording, broadcast or cable program and in any literary,
dramatic, musical, or artistic work embodied therein.
Carefully read the "Rules of Digital Dubbing" on page
23.
The MD Recorder supports the following sampling frequencies
for digital sources.
For the OPTICAL DIGITAL IN (AUX2): 32 kHz, 44.1 kHz and
48 kHz.
For the CD Player of the Unit: 44.1 kHz.
The recording level, which is the volume at which the new MD
is being made, is automatically set correctly, so it is not affected
by the VOLUME level of the System. Nor it is affected by ad-
justing the sound effects. Thus, during recording you can adjust
the sound you are actually listening to without affecting the re-
cording level.
The accidental erasure prevention knob is provided on the back
of an MD cartridge to prevent accidental erasure or recording.
It must be set to the close position beforehand.
Close
When you stick an adhesive label onto the MD cartridge, adhere
it securely. If it peels off, ejection trouble, etc. will occur.
Preparation Before Recording
Be sure that the MD is not the Play-only type one.
=
(back to the beginning)
AHB. PRESET
DOWN MULTI CONTROL UP
SUPER PRO TUNING
POWER
MD
TAPE TUNER
/AUX BAND
CD SYNCHRO REC
VOLUME
REC PAUSE
DOWN UP
REC PAUSE
38
CD SYNCHRO REC
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
Accidental erasure prevention knob
Open
To exit Repeat mode, press the REPEAT button until the Repeat
indicator on the display goes out.
In Random Play, as a matter of course,
Repeat mode remains on the display even when you change the
play mode.
7
TIMER/
Track number, Playing time, Preset number
SNOOZE
CLOCK
38
MD
OPEN/CLOSE
CD
CD
EJECT
0
MD
MD
Music calender
Be sure that the accidental erasure prevention knob of the MD
cartridge is set to the close position. Otherwise, "DISC PRO-
TECTED" will appear when you try to record a signal to the
MD.
Be sure that the MD has enough space for recording. If not, car-
ry out ALL ERASE or ERASE function to erase all the tracks
or desired tracks in the MD. (See pages 16-17.) You can check
the recordable remaining time of the MD in Stop mode or dur-
ing recording by pressing the DISPLAY/CHARA button.
(See "Checking the Remaining Time of the MD" mentioned on
page 14.)
Indication of the MD Indicator for
Recording
The MD indicator on the front panel of the Unit blinks as follow.
Record-pause mode:
During recording:
MD inserted or played: Stays lit.
Standard Recording
You can record any sound source to an MD as follows.
1. Insert a MD with its label side up.
The MD indicator lights up.
2. Prepare one of the sources.
CD: Use the "CD Synchro Recording" mentioned below.
Tuner: Tune in to a station.
AUX1 (LINE IN (AUX1)): Press the TAPE/AUX button on the
Unit or the Remote Control until "AUX 1 ANALOG IN" ap-
pears on the display.
AUX2 (OPTICAL DIGITAL IN (AUX2)): Press the TAPE/
AUX button on the Unit or the Remote Control until "AUX 2
DIGITAL IN" appears on the display.
3. Press the REC PAUSE button on the Unit or
the ¶/8 button on the Remote Control.
The MD indicator starts blinking and the track number in the
music calender is increased by 1.
cannot be selected.
OVER indicator which lights up if the
number of tracks of the MD exceeds 20.
Blinks rapidly.
Blinks slowly.
13