Recording Onto A Tape; Dubbing Tapes - JVC CA-DXU20 Instructions Manual

Recording onto a Tape

You can use type I tapes for recording.
• To play a tape, see page 12.
Insert a recordable cassette into deck B.
1
Push
2 Check the tape running direction and Reverse Mode
settings on the display.
Reverse Mode indicator
Current source
To change the direction
3 (forward)
2 (reverse)
Change the Reverse Mode if necessary
REVERSE
MODE
To record on both sides.
•
When using Reverse Mode, start
( ) recording in the forward (
To record on only one side.
Start playing the source—"TUNER FM,"
3
"TUNER AM," "DVD/CD," "USB," "TAPE-A" or
"AUX."
• When recording from a disc/USB mass storage class
device, you can also use "Synchronized Recording"
(see page 32).
• When recording from deck A, you can also use
"Dubbing" (see "Dubbing Tapes" on the right column).
31
INFO
Insert Close
Tape direction indicator
Remote
ONLY
3
) direction.
4 Start recording.
To stop recording
or

Dubbing Tapes

You can record a tape from deck A to deck B.
1 Change the source to "TAPE".
Insert the source cassette in deck A, and a recordable
2
cassette in deck B.
3 Check the tape running direction and Reverse Mode
settings on the display.
See step 2 of "Recording onto a Tape" on the left column.
4 Start dubbing.
• When either tape playback or recording ends, both cassette
decks stop at the same time.
To stop dubbing
Main Unit
ONLY