Assigning A Procedure (Operating Steps) To A Key - T-Mobile Octopus F100 Operating Instructions Manual

Saving Functions, Procedures and Appointments
Step by Step
Program/Service
>
*
91=Prog. feature key?
Change feature?
>
Procedure key?
Redial
Save entry?
>
Previous?
End?
>
Program another key?
58
Assigning a Procedure (Operating Steps)
to a Key
Station numbers and functions which require additional inputs, i.e.
comprise several operating steps, can be saved to a single key on
your telephone.
Using the associated dial function, for example
save all the remaining inputs required (station number of the calling
party + the station number to be dialed) to a single key.
Station numbers which require additional inputs but also dial pauses
can also be stored.
Press the key. The LED lights up.
:
Select and confirm.
or
qme Enter the code.
Press the key. If a function has already been assigned to this key, a
corresponding message is displayed.
: Confirm.
:
Confirm.
o Enter the procedure, e.g. "*67 231 089123456".
*67= code for associated dial
231= station number of the calling party
089123456 = number to be dialed.
If necessary
To insert pauses, press this key (a "P" is displayed).
:
Confirm.
or If you make a mistake:
: Select and confirm. This deletes all digits entered.
:
Confirm.
or
:
Select and confirm.
page 44, you can