Making Calls - Basic Functions; Answering Calls; Answering A Call With The Handset; Answering A Call With The Speaker (Speakerphone Mode) - T-Mobile Octopus F100 Operating Instructions Manual

Step by Step
Speaker
Making Calls – Basic Functions

Answering Calls

Special default ring signaling is set for your telephone:
• When you receive an internal call, your telephone rings once
every four seconds (single-tone sequence).
• When you receive an external call, your telephone rings twice in
rapid succession every four seconds (dual-tone sequence).
• When you receive a call from the entrance telephone, your tele-
phone rings three times in rapid succession every four seconds
(triple-tone sequence).
• If a call is waiting, you hear a short tone (beep) every six seconds.
Your service personnel can adjust the ring cadence for exter-
nal and internal calls for you. In other words, different ring ca-
dences can be set for different internal callers.
The number or the name of the caller appears on the display.

Answering a Call With the Handset

The telephone rings. The caller appears on the screen.
n
Lift the handset.
u v
or Raise or lower the volume. Keep pressing the key until the desired vol-
ume is set.
Answering a Call with the Speaker
(Speakerphone Mode)
This function is not available with Octophon F20.
The telephone rings. The caller appears on the screen.
Press the key. The LED lights up.
Speakerphone mode.
u or v Raise or lower the volume. Keep pressing the key until the desired vol-
ume is set.
Making Calls – Basic Functions
13