Advertisement
ENABLE INSTALLER SETTINGS
You will need to select certain Installer Setting based on any Optional Equipment that you may have
Launch the Installer Setting Screen
From any screen with the Menu Button, follow these steps
to display the Installer Setting Screen:
1) From any Screen, select "Menu"
2) From the Menu Screen, select "Settings"
3) Press "Keypad," Press "7253" and "Enter"
Select the individual Settings as needed
for the installed components
Selectable options vary by product and installation. Select
the options as applicable for the installed optional
Perform Pre-Delivery Tests
You will need to perform several Pre-Delivery Tests to ensure customer satisfaction
Turn the vehicle ON and System ON
Confirm the unit starts up properly
Troubleshooting
1) Reset the System while the Vehicle is ON
2) Confirm all connectors are properly installed
3)
Check the Vehicle and System Fuses
Select RADIO as the Source
Confirm that the AM and FM reception are as expected
Troubleshooting
1) Confirm Antenna is properly connected.
2) Reset the System
Rosen Entertainment Systems
Installation Guide
Installation Guide Universal Series
installed
components.
Some equipment may be optional
STEP
6
STEP
7
Copyright 2010 All Rights Reserved
DP-UN1014 Rev B
Page 7
Advertisement
