Tilt Steering Column - Dodge 2010 Grand Caravan User Manual

Memory Seats
• To program a Key Fob to the memory position, press and release the LOCK button
within 10 seconds on the Key Fob to be programmed.
• Place the ignition switch in the ON position, select Remote Linked to Memory in the
Electronic Vehicle Information Center (EVIC) and enter Yes.
• Press 1 or 2 to recall the saved positions, or press UNLOCK on the programmed Key
Fob.

TILT STEERING COLUMN

Do not adjust the steering wheel while driving. The tilt adjustment must be locked
while driving. Adjusting the steering wheel while driving or driving without the tilt
adjustment locked could cause the driver to lose control of the vehicle. Failure to
follow this warning may result in serious injury or death.
GETTING STARTED
• The memory seat feature allows you to save
two different driver seating positions,
driver's outside mirror, adjustable brake
and accelerator pedals, and radio station
preset settings. The memory seat switch is
located on the driver's door panel.
• Adjust all memory profile settings, press the
SET button then press 1 or 2 within five
seconds.
• The tilt steering column tilt lever is located
below the steering wheel.
• Push down on the tilt lever to unlock the
steering column.
• With one hand firmly on the steering wheel,
move the steering column upward or
downward as desired.
• Pull upward on the tilt lever to lock the
column firmly in place.
WARNING!
13