Table of Contents
Advertisement
Trunk Configuration page (continued): version 4.1(3)
Setting
Destination Address
Destination Port
Incoming Port
Outgoing Transport Type Must be UDP.
Preferred Originating
Codec
Note
•
•
If either of these values is not required, select None.
Chapter 2
Integrating with Cisco Unified Communications Manager 4.1(3)
Description
The IP address of the EasyCall Gateway.
The port of the proxy server. Defaults to 5060 and should not be changed.
The listening port of the Unified Communication Manager. Defaults to 5062.
Must be 711ulaw.
The PBX administrator must provide the following call routing information for
Inbound Calls section of the SIP trunk configuration:
Calling Search Space
AAR Calling Search Space
5
Advertisement
Table of Contents
Need help?
Do you have a question about the EasyCall Gateway 3.0 and is the answer not in the manual?
Questions and answers