Table of Contents
Advertisement
28
EasyCall Gateway Telephony System Integrator's Guide
SIP Trunk Security Profile Configuration page
Setting
Name
Outgoing Transport Type Must be UDP.
Incoming Port
Configuring the SIP Trunk
The following screens show a sample trunk configuration. The default values required
for the trunk to be active are included. The table following the screens describes the
values that are important for EasyCall Gateway integration.
Description
Must be Non Secure SIP Trunk Profile - UDP. When "Configuring the SIP Trunk"
on page 28, this name must be entered under the SIP Information section as
the SIP Trunk Security Profile.
Defaults to 5060. This is the listening port on the Unified Communication
Manager and it must match the EasyCall Gateway port, which also defaults to
5060.
Advertisement
Table of Contents
Need help?
Do you have a question about the EasyCall Gateway 3.0 and is the answer not in the manual?
Questions and answers