Olivetti PG L2140 Operation Manual page 27

Checking that TCP/IP is On
This is an explanation of the method for setting for IPv4, but TCP/IP should also be On when setting for IPv6.
TCP/IP Settings: a b
TCP/IP
1
********************-
IPv4 Setting
2
IPv6 Setting
3
TCP/IP:
1 Off
2 *On
********************-
TCP/IP Settings: a b
TCP/IP
1
********************-
IPv4 Setting
2
IPv6 Setting
3
Switching DHCP to Off or On
Select On when using a DHCP server to automatically obtain an IP Address. Select Off to enter an IP Address.
IPv4 Setting:
DHCP
1
********************-
Auto-IP
2
IP Address
3
DHCP:
1 Off
2 *On
********************-
4
[ Exit ]
5
6
a b
7
8
[ Exit ]
9
10
a b
[ Exit ]
11
12
a b
13
Select TCP/IP Settings and press [OK]. The TCP/IP Settings
menu screen appears.
Press  or  to select TCP/IP.
Press [OK]. The TCP/IP screen appears.
Check that On is selected. If Off is selected, then press  or  to
select On.
Note "*" is displayed for the setting which has been
selected.
Press [OK]. The TCP/IP setting is set and the TCP/IP Settings
menu reappears.
Press  or  to select IPv4 Setting.
Press [OK]. The IPv4 Setting menu screen appears.
Press  or  to select DHCP.
Press [OK]. The DHCP screen appears.
Press  or  to select Off or On.
2-4
Preparation before Use