Olivetti PG L2140 Operation Manual page 176

Off/On:
Off
1
2 *On
********************-
Authenticat Type (Authenticat type setting)
Set the authentication method.
Authenticat Type: a b
1 *Simple
********************-
SASL
2
Login/Logout
Once you enable user login administration, a login user name and password entry screen appears each time you use this
machine. Enter the user information registered on the network authentication server as the login user name and password.
Register new users from the Olivetti Net Policy Manager. For details, refer to the Olivetti Net Policy Manager User
Guide.
Note To carry out operations restricted in the mode selection menu operation and Lock Operation Panel settings,
it is necessary to log in as a user with administrator authority.
For the administrator settings, refer to
For Lock Operation Panel, refer to Lock Operation Panel on page 2-19.
Login
Use the procedure below to login.
Login User Name:
/******************-
Login Password:
[ Menu ] [ Login
2
Press [OK]. The Off/On screen appears.
a b
3
Press  or  to select On or Off.
4
Press [OK]. The NW User Property menu reappears.
1
In the NW User Property menu, press  or  to select
Authenticat Type.
2
Press [OK]. The Authenticat Type screen appears.
3
Press  or  to select Simple or SASL.
4
Press [OK]. The NW User Property menu reappears.
Administrator on page 4-117 .
1
With the Login User Name entry field selected, press [OK]. The
O
b
Login User Name entry screen is displayed.
]
4-115
Operation Panel