Hitachi ZAXIS 120-3 class Operator's Manual page 89

When more than two items apply
•
1. If turning the key switch to the ON position, the starting
screen displays. Then, the scheduled maintenance screen
for the items whose change interval has expired displays
for three to ten seconds. Finally the basic screen displays.
NOTE: For a machine which the basic screen is displayed ac-
cording to a password on, the scheduled maintenance
screen for the items whose change interval has expired
displays for three to ten seconds, after the password is
input successfully and the determination key is pushed.
And then the basic screen displays.
2. If data is reset, while the scheduled maintenance screen
is displayed, select desired item by using keys 1
. Push the determination key. Then, the maintenance
information display screen for the selected item displays.
(In the right example, Hydraulic Oil is selected.)
NOTE: When pushing the back key while the scheduled main-
tenance screen is displayed, the basic screen displays.
3. Push the reset key while the maintenance information
display screen is displayed.
The message "Reset Data. OK?" displays. Then, push the
determination key.
The value of remaining hours is reset to that of change
interval. Previous change date/hour is updated with cur-
rent date and time.
NOTE: When pushing the back key while the maintenance
information display screen is displayed, return to the
scheduled maintenance screen.
NOTE: When pushing the back key while the reset screen is dis-
played, return to the maintenance information display
screen.
OPERATOR'S STATION
and 2
Key 1
Key 2
1-40
Starting Screen
Scheduled Maintenance Screen
Maintenance Information Display Screen
Reset Screen
T1V1-05-01-115
Back Key
Determination
Key
T1V5-05-01-169
Back Key
Reset Key
T1V5-05-01-170
Back Key
T1V5-05-01-171