Precaution For Arm Roll-In/Bucket Roll-In Combined Operation; When Installing An Attachment Longer Than Standard Bucket - Hitachi ZAXIS 120-3 class Operator's Manual

Table of Contents

PRECAUTION FOR ARM ROLL-IN/BUCKET ROLL-IN

COMBINED OPERATION

--- If Headguard-Integrated Cab or Rainguard is

WARNING: The bucket teeth will hit the headguard or

rainguard if the bucket is rolled in with the arm fully

rolled in, as illustrated. When performing combined

operation of long arm roll-in/bucket roll-in or when

rolling in the bucket with the arm fully retracted, be

careful not to hit the headguard or rainguard with the

bucket teeth.

WHEN INSTALLING AN ATTACHMENT LONGER

THAN STANDARD BUCKET

WARNING: When an attachment (such as a hydraulic

breaker or crusher), the overall length of which is

longer than that of the bucket, is installed, the attach-

ment may come in contact with the cab and/or the

boom. Operate the machine with care not to allow the

tip of the front attachment to hit the cab and/or the

boom while rolling in the front attachment.

OPERATING THE MACHINE

Take care not to hit the boom

with the front attachment