Table of Contents
Advertisement
BUCKET TYPES AND APPLICATIONS
ZX210LCN-3, 240N-3
Bucket
Hoe Bucket
Bucket reinforcement can
be welded in four places
upon customer's request
Reinforced Hoe Bucket
HD Type (Transverse-
Type-Pin-Used Type)
V-Type Bucket
Ripper Bucket
One Point Ripper
Clamshell Bucket
Slope-Finishing Blade
NOTE: • Symbols in the above table have the following meanings.
: General excavating
: Light duty excavating
: Rock digging
: Loading work
: Slope-finishing work
− : Not applicable (not warrantable)
• Hoe bucket is applicable to the following types of work.
General excavating:
For digging and loading operation of sand, gravel, clay, ordinary earth and so on.
Light duty excavating:
For digging and loading operation of dry, loosened earth, sand, mud and so on.
Their bulk density shall be less than 1.60 t/m
Loading:
For loading operation of dry, loosened earth and sand.
Their bulk density shall be less than 1.10 t/m
Rock digging:
For digging/loading operation of mountain gravels, blasted rock, hard clay, soft rock and so on.
IMPORTANT: Using inapplicable buckets may cause serious damage to the front structure such as boom, arm and
hydraulic cylinders.
SPECIFICATIONS
Bucket Capacity
3
3
m
(yd
)
PCSA
CECE
(Heaped)
(Heaped)
0.51 (0.67)
0.45
0.80 (1.05) HD
0.7
0.80 (1.05)
0.7
0.91 (1.19)
0.8
1.10 (1.44)
0.9
1.20 (1.57)
1.0
0.80 (1.05)
0.7
0.91 (1.19)
0.8
0.80 (1.05)
0.7
−
0.50
(0.65)
−
0.60
(0.78)
−
Bucket Width mm
(in)
Application
(With side cutter)
830 (33")
1150 (45")
1140 (45")
1260 (50")
1440 (57")
1450 (57")
(Without side cutter)
1140 (45")
1260 (50")
1140 (45")
Excavating
90°
V-trenches
800 (31.5")
(Without side cutter)
−
Bucket width
Side ditching
940 (37")
1800
Bank cutting
(70")
3
3
(2700 lb/yd
) as a standard.
3
3
(1850 lb/yd
) as a standard.
12-28
Front-End Attachment
ZX210LCN-3
2.42 m
2.91 m
(7'11")
(9'7")
Arm
Arm
−
−
−
−
finish
ZX240N-3
2.42 m
2.91 m
(7'11")
(9'7")
Arm
Arm
−
−
−
Advertisement
Table of Contents
