Self-Diagnostics Results Of The Ccu-590/590P Internal Boards - Sony CCU-590 Operation Manual

Page 2
NS Mode: Setting for the ETHERNET connection mode
LEGACY: Connection mode for the REMOTE
connector (factory-setting)
BRIDGE: ETHERNET connection mode
MCS: ETHERNET connection mode
MCS Mode: Setting of master or client for the Ethernet
connection of the multi-camera system
CLIENT: Client mode (This unit is placed under
control of the master device.)
CCU No.: CCU number setting
Master IP Address: IP address of the master device
Page 3
IP Addr: IP address
NetMask: Net mask
Def GW: Default gateway
Self-diagnostics results of the CCU-
590/590P internal boards
For details on the internal boards, refer to the System
Manual.
DM board
CAM Video: Status of the Y, R-Y, and B-Y signals of the
triax signal
Skin Gate: Reception status of the Skin gate signal from
the camera
TRIAX Comp.: Cable compensation of a triax cable
TRIAX Step: Compensation step of the triax cable (step
indication in the circuit) (The cable length may not be
displayed correctly.)
Power: DM board power supply status
TR board
Prompter: Setting status of the prompter line
Tone: Tone signal status
Incom: Demodulating status of the intercom line
CHU Data: Data reception status from the camera
Power: TR board power supply status
BoardID: ID number of the TR board
AT board
Reference: Operation mode of the phase adjustment
13
Self-Diagnostics