Useful Features - Panasonic VoiceSonic KX-NT700 Quick Reference Manual

Confirming the caller then creating a
conference call
1.
Press .
ANSWER
•
The first call is put on hold, and you can talk to
the second caller.
•
To end the second call, press
continue the first call.
2.
Press to establish a conference call.
CONF
Refusing a second call
Press . The second caller is disconnected and
REJECT
the current call continues.

Useful Features

Recording
Conversations and voice memos can be recorded to an
SD memory card (32 MB–2 GB). Insert the SD memory
card as shown, with the label side facing up.
Recording a conversation
1.
Press during a conversation.
REC
•
"Remaining Time" and the approximate
recording time available are displayed briefly,
then "Conf Recording" and the approximate
length of the call are displayed.
2.
To stop recording, press
Speech Speed Conversion
You can adjust the speed of the other party's speech
down during a call by pressing
to change the current setting or turn the feature off.
"Slow" is shown on the display while this feature is
active.
Mic Noise Reduction
You can press the [MIC NOISE CUT] button during a
call to reduce the ambient noise that is picked up by the
microphones and sent to the other party. Press
Document Version 2008/10
, then
END
.
STOP
. Press repeatedly
SPEED
repeatedly to change the current setting or turn the
feature off.
"Noise Cut ON" is shown on the display while this
feature is active.
Conferencing Phone Manager
The unit can be used in conjunction with Conferencing
Phone Manager. This software can be found on the
included CD-ROM, and allows you to operate and
program the unit using a computer.
For installation and operation, see the Operating
Instructions.
Quick Reference Guide
Quick Reference Guide 7