Ip Line Operation Mode; Ip Network, Sip Settings; Making Calls - Panasonic VoiceSonic KX-NT700 Quick Reference Manual

•
"IP + PC": The IP and PC lines are available.
4.
Press .
SAVE
5.
Press [MENU].
Note
•
If you select "IP + TEL", change the dial mode
(default: "Tone") if necessary:
[MENU]®select "TEL
Settings"®select "Dial
Mode"®select "Pulse" or "Tone"®
®[MENU]

IP Line Operation Mode

Whether IP calls are made and received using peer to
peer mode or IP-PBX mode is determined by
the "Operation Mode" setting.
1.
Press [MENU].
2.
Select "Operation Mode", then press
3.
Select the desired setting.
•
"IP-PBX": The unit can make and receive IP
calls as a SIP extension of the PBX.
•
"Peer to Peer": Peer to peer IP calls are
possible. To make a call, the other party's IP
address is specified.
4.
Press .
SAVE
5.
Press [MENU].
Note
•
If these settings are changed, the unit must be
restarted before the new settings become
effective. See the Operating Instructions for
details.

IP Network, SIP Settings

To properly connect the unit to an IP network, the
following settings must be set to match the settings of
the IP network.
–
IP address mode: Automatic (DHCP) or manual
(static) IP address assignment (default: static)
–
IP address (when static connection mode is
selected; default: 192.168.0.2)
–
Subnet mask (when static connection mode is
selected; default: 255.255.255.0)
–
Default gateway (when static connection mode is
selected; default: 0.0.0.0)
To use the unit as a SIP extension of the PBX, the unit
must be registered as a SIP extension through PBX
programming, the "Operation Mode" setting must be
set to "IP-PBX" (this is the default setting), and the
Document Version 2008/10
following settings must be set to match the settings of
the PBX.
–
SIP Ext. No.
–
SIP Password
–
SIP User Domain Name
–
SIP Proxy Server IP Address
–
SIP Registrar IP Address
See the Operating Instructions for details. Consult your
system administrator for the appropriate settings.
SAVE Note
•
If these settings are changed, the unit must be
restarted before the new settings become
effective. See the Operating Instructions for
details.

Making Calls

1.
Confirm that the desired line is selected. Change the
.
selected line by pressing the center function button
SELECT
[F2].
Example:
The TEL line is selected (A). The IP line will be
selected when
2.
Press [
3.
For TEL calls: Enter the phone number.
For IP calls with IP-PBX connection: Enter the
phone number.
For IP calls with peer to peer connection: Enter
the IP address, then press [#] or [ENTER].
•
IP addresses can be entered using the keypad.
[0]–[9] are used to enter numbers and [ ] is
used to enter a period.
4.
To end the call, press [
Making Calls with a PS or Computer
1.
Make or answer a call using the PS or computer, and
confirm that you can talk to and hear the other party.
2.
Connect the unit to the PS or computer (see
page 4).
Quick Reference Guide
A
B
(B) is pressed.
IP
].
].
Quick Reference Guide 5