Configuring System Message For Survivable Telephony - Samsung Ubigate iBG2016 Configuration Manual

CHAPTER 12. Survivable Telephony
Configuring System Message for Survivable
Telephony
When Ubigate iBG2016 is converting between Call Manager interworking
mode and Survivable Telephony mode, to inform that mode is converting, it
sends designated messages through MESSAGE method with SIP phone.
This section describes how to send the messages.
How to Configure System Message for Survivable Telephony mode
When Call Manager interworking mode is converted to Survivable Telephony
mode, it sets up the message that would be sent to SIP phone as following
procedures. The basic message is 'Survivable Mode'.
Summary Steps
configure terminal
−
voip-fallback
−
system-message survivable
−
exit
−
Detailed Steps
Step
1
2
3
4
682
Command
configure terminal
Example)
# configure terminal
voip-fallback
Example)
/configure# voip-fallback
system-message survivable system-
message
Example)
/configure/voip-fallback# system-message
survivable 'Survivable Mode'
Exit
Example)
/configure/voip-fallback# exit
Purpose
Enters global configuration
mode.
Enters VOIP Fallback
configuration mode.
Specifies message context to
inform mode transition from
scm interworking to survivable
telephony.
Exits the current mode
© SAMSUNG Electronics Co., Ltd.